Cisco Catalyst 3560-X User Manual

1-56
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Chapter 1 Configuring IEEE 802.1x Port-Based Authentication
Configuring 802.1x Authentication
Creating an LLDP Filter
Beginning in privileged EXEC mode, follow these steps to create an LLDP filter containing a list of
TLVs that can be included or excluded in the Device Sensor output:
Creating a DHCP Filter
Beginning in privileged EXEC mode, follow these steps to create a DHCP filter containing a list of
DHCP options that can be included or excluded in the Device Sensor output:
Command Purpose
Step 1
configure terminal
Example:
Switch# configure terminal
Enters global configuration mode.
Step 2
device-sensor filter-list lldp list
tlv-list-name
Example:
Switch(config)# device-sensor
filter-list lldp list lldp-list
Creates a TLV list and enters LLDP sensor configuration mode, where
you can configure individual TLVs.
Step 3
tlv {name tlv-name | number tlv-number}
Example:
Switch(config-sensor-cdplist)# tlv
number 10
Adds individual LLDP TLVs to the TLV list. You can delete the TLV
list without individually removing TLVs from the list by using the no
device-sensor filter-list lldp list tlv-list-name command.
Step 4
end
Example:
Switch(config-sensor-lldplist)# end
Returns to privileged EXEC mode.
Command Purpose
Step 1
configure terminal
Example:
Switch# configure terminal
Enters global configuration mode.
Step 2
device-sensor filter-list dhcp list
option-list-name
Example:
Switch(config)# device-sensor
filter-list dhcp list dhcp-list
Creates an options list and enters DHCP sensor configuration mode,
where you can specify individual DHCP options.

Cisco Catalyst 3560-X Specifications

General

Enclosure Type	Rack-mountable - 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 + 4 x SFP
Flash Memory	64 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Device Type	Switch
Performance	Switching capacity: 128 Gbps
Jumbo Frame Support	Yes
Routing Protocol	RIP-1, RIP-2, EIGRP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS
Features	DHCP support, VLAN support, QoS, IPv6 support, Syslog
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.3at
Stacking	Stackable
Security Features	SSH, RADIUS, TACACS+
Management	CLI
Dimensions (H x W x D)	17.5 in
Operating Temperature	32 to 113 °F (0 to 45 °C)
Humidity	10 - 95% (non-condensing)