2-247
Cisco ONS 15454 Troubleshooting Guide, R8.5
November 2009
Chapter 2 Alarm Troubleshooting
2.7.417 TIM-V
2.7.417 TIM-V
Default Severity: Major (MJ), Service-Affecting (SA)
SONET Logical Object: VT-TERM, VT-MON
The VT Path TIM alarm is raised on VT terminations when the J2 path trace is enabled and is
mismatched with the expected trace string.
Clear the TIM-V Alarm
Step 1 Complete the “Clear the TIM Alarm” procedure on page 2-244.
Step 2 If the alarm does not clear, log into the Technical Support Website at http://www.cisco.com/techsupport
for more information or call Cisco TAC 1 800 553-2447 to report a Service-Affecting (SA) problem.
2.7.418 TPTFAIL (CEMR, CE100T, CE1000)
Default Severity: Major (MJ), Service-Affecting (SA)
SONET Logical Objects: CEMR, CE100T, CE1000
The Transport (TPT) Layer Failure alarm for the CE-Series card indicates a break in the end-to-end
Ethernet link integrity feature of the card. TPTFAIL indicates a far-end condition and not a problem with
the port reporting TPTFAIL.
Note For more information about Ethernet cards, refer to the Cisco ONS 15454 and
Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide.
Clear the TPTFAIL (CEMR, CE100T, CE1000) Alarm
Step 1 Complete the “Clear the TPTFAIL (G1000) Alarm” procedure on page 2-248.
Step 2 If the alarm does not clear, log into the Technical Support Website at http://www.cisco.com/techsupport
for more information or call Cisco TAC 1 800 553-2447 to report a Service-Affecting (SA) problem.
2.7.419 TPTFAIL (FCMR)
Default Severity: Major (MJ), Service-Affecting (SA)
SONET Logical Object: FCMR
The Transport Fail alarm is raised against a local Fibre Channel (FC) port on an FC_MR-4 card when
the port receives another SONET error such as the “AIS-P” alarm on page 2-37, the “LOP-P” alarm on
page 2-155; “UNEQ-P” alarm on page 2-252, the “PLM-P” alarm on page 2-195, the “TIM-P” alarm on
page 2-245, the “LOM” alarm on page 2-154 (for VCAT only), or the “SQM” alarm on page 2-231 (for
VCAT only).
To Next Page
Loading...
