Comen C80 - Page 184

175
are connected correctly.
"BRADY (bradycardia)" The patient suffers from bradycardia.
Check the current status of the patient,
and whether the electrode and lead cable
are connected correctly.
"VT>2 (multiple PVS)"
The patient suffers from arrhythmia of
multiple PVS.
Check the current status of the patient,
and whether the electrode and lead cable
are connected correctly.
"MISSED BEATS"
The patient suffers from arrhythmia of
missed beat.
Check the current status of the patient,
and whether the electrode and lead cable
are connected correctly.
"PNP (Pacemaker not paced)" The pacemaker doesn’t pace.
Check the connection of the pacemaker,
the current status of the patient, and
whether the electrode and lead cable are
connected correctly.
"PNC (Packer not captured)" No pacemaker signal is captured.
Check the current status of the patient,
and whether the electrode and lead cable
are connected correctly.
"ECG lead disconnected" ECG lead cable is not joined well. Check the connection of ECG lead cable.
"ECG V lead disconnected" ECG V-lead cable is not joined well.
Check the connection of ECG V-lead
cable.
"ECG LL lead disconnected" ECG LL-lead cable is not joined well.
Check the connection of ECG LL-lead
cable.
"ECG LA lead disconnected" ECG LA-lead cable is not joined well.
Check the connection of ECG LA-lead
cable.
"ECG RA lead disconnected" ECG RA-lead cable is not joined well.
Check the connection of ECG RA-lead
cable.
"ECG C lead disconnected" ECG C-lead cable is not joined well.
Check the connection of ECG C-lead
cable.
"ECG F lead disconnected" ECG F-lead cable is not joined well.
Check the connection of ECG F-lead
cable.
"ECG L lead disconnected" ECG L-lead cable is not joined well.
Check the connection of ECG L-lead
cable.
"ECG R lead disconnected" ECG R-lead cable is not joined well.
Check the connection of ECG R-lead
cable.
"SPO2 sensors fall off " SPO2 sensor is not joined well. Check the connection of SPO2 sensor.
"Searching pulse"
SPO2 sensor is not joined well, or the
patient moves his arms.
Check the connection of SPO2 sensor
and the current status of the patient.
"TEMP sensors fall off " TEMP sensor is not joined well. Check the connection of TEMP sensor.
"IBP lead disconnected" IBP sensor is not joined well. Check the connection of IBP sensor.
"IBP needs zeroing" IBP needs zeroing before measurement. Zero pressure for IBP.