Comtech EF Data DMD1050TS - Table 9-6. Network Menu Options

DMD1050TS Satellite Modem Board
Revision 1
TRANSEC Module SSH CLI Operation 9–10 MN-DMD1050TS
9.2.4.4 Configuration | Network Menu [N]
Figure 9-7. Network Menu Example
Table 9-6. Network Menu Options
Menu Options/Fields
Entry
Description
Secure Management
IP
M
Change the TRANSEC Module IP address as necessary.
Note: If this address is changed, you must repeat the login process for the SSH
interface, using the new IP address, to regain access to the TRANSEC Module
SSH CLI.
Subnet Bits
B
Change the IP subnet mask of the TRANSEC Module as necessary.
Gateway IP G
Change the TRANSEC Module IP gateway address as necessary.
Note: If this address is changed, it must match the subnet of the Secure
Management IP. If it does not match, then the Gateway IP text box will default to
0.0.0.0.