DMD1050TS Satellite Modem Board
Revision 1
Theory of Operation 3–15 MN-DMD1050TS
3.7.1.8 Set Up the DMD1050TS Ethernet Bridge to Operate Like a FIFO
In certain circumstances, it can be desirable to have the Ethernet interface operate in a FIFO-like
manner, with no reordering of packets. This can be established by using a single port on the
Ethernet interface, and setting the Ethernet QoS Type to Port Based, and the Ethernet QoS
Queue to Strict Priority. When set up and used in this manner, the packets are transmitted in the
exact order in which they are received.
Figure 3-6. Point-to-Multipoint with Daisy Chaining
To Next Page
Loading...
