Instruction Manuals: Installation, Operators Maintenance Standard 360a Model Y (360y) Label Applicator
xiii
Mechanical Hazards
Noise Emissions
• Less than 70dB(A)
Every Time Before Starting Production
• Remove all material and objects that are not required from the working area of the applicator.
• Allow only authorized personnel to remain in the working area.
• Ensure no one is endangered by the applicator starting up.
• Ensure all personnel in the working area of the applicator are using protective equipment properly.
• Check the equipment for visible damage and report any damage that is identified immediately.
• Check all equipment safety functions to ensure they are working properly
• Danger of injury due to moving parts!
• Maintain a safe distance from the machine while running.
• Do not reach into the applicator area while the applicator is running.
• Disable the applicator before making any adjustments.
• Keep the applicator area clear around moving parts, even if the applicator is stopped.
• Danger of crushing between applicator and conveyor!
• Access to the running applicator must be prevented by the protective guarding of the system.
• Do not remove or attempt to disable any protective guarding of the system or operate the applicator if the
protective guarding is damaged.
• Danger of entanglement!
• When working in the applicator area, loose clothing items, jewelry, necklaces, ties, wrist watches or
similar objects on your body are at risk of getting caught in the machine.
• Long hair must be kept in a hair net and must not be worn loose.
To Next Page
Loading...
