Datalogic DX8210 User Manual

Logical Combination
Reference Manual 89
Filter Out Low Height Codes
Select the check box to reveal the Minimum Readings Difference Between Scanners
field.
Background: This option was developed for the airports systems where there are
often tall bar height codes and low bar height codes with the same content
attached to baggage. Travelers will often remove the large, tall bar height code,
while leaving the smaller, low bar height codes attached to the bag. The next time
they travel they may have multiple low bar height codes on their baggage plus the
new tall bar height and low bar height codes for the new trip.
This option instructs the system to ignore low bar height codes, which are likely
read only once or twice, in favor of tall bar height codes, which will likely be read
multiple times.
This is used in tunnel applications where multiple barcodes are read and there is a
need to filter out one of the barcodes. If less than x number of scanners read the
barcode, then it will be considered a NOREAD for that code.
Minimum Readings Difference Between Scanners
Enter the minimum number of scanners that must read a barcode for it to be
considered a valid read.
Filter Out Single Readings
With the check box selected, if only 1 scanner reads a code it will be considered a
NOREAD.
Strip Filter
Select the check box to display the Strip Filter Settings options. This is a second
level filter that when enabled allows eliminating characters not managed by the
host.
Strip Filter Settings
Strip All Non Printable Chars
Select the check box to remove all non- printable ASCII characters from the code
(000-020 and 127).
Char(s) to be Stripped
Click to activate the Text Entry Tool and enter specific characters to be stripped
from the code. Click Submit to save your text to the origin window text field, or
click Cancel to return to origin window without transferring text.
Strip Filter Collapse
Select the check box to remove the stripped characters from the code and,
therefore, reduce the code length (collapsed). It can even be null.
Replacement Char
If Strip Filter Collapse is not selected, click to activate the Text Entry Tool and
enter the substitution character to replace all the stripped ones. Click Submit to
save your text to the origin window text field, or click Cancel to return to origin
window without transferring text
Priority Filter Enable
Select the check box to display the Priority Filter options. This function allows
the user to prioritize barcodes.
Example:
If there is a message with a field that should contain one of multiple code types (for
example, Code128, Code39 and I2of5). In this field, the user wants:
If Code 128 is read, it goes in the field (any code39 and I2of5 are ignored)
If Code 128 is not read – if Code39 is read, it goes in the field (and I2of5 is ignored)

Datalogic DX8210 Specifications

General

Brand	Datalogic
Model	DX8210
Category	Barcode Reader
Language	English