Datalogic DX8210 User Manual

Error Codes and Resolutions
Reference Manual 277
220
Network
Ring Open
Error
When the
SC5000 is used,
the scanner
internal net
-
work is con-
nected in a
chain configura
-
tion. If the
SC5000 detects
that network
chain is not
complete, it will
post this error.
- The system
experiences a
higher no-read
rate.

- One or more
scanners may
not appear on
the System
Info page (see
section
).
- Confirm that
all the scanners
are connected in
the chain.

- Use the scan-
ner test mode to
confirm that the
scanner can
statically read
-
ing a barcode
(see section
“Diagnostics |
Read Test” on
page 176
)
- Position a bar-
code on a box so
it faces the ques
-
tionable scan-
ner, and
dynamically test
the scanner.
- Replace faulty
scanner.
Error
Code
Descrip-
tion
Sever-
ity
Explanation Symptom Troubleshooting Action required

Datalogic DX8210 Specifications

General

Brand	Datalogic
Model	DX8210
Category	Barcode Reader
Language	English