ENTER/EXIT PROGRAMMING MODE
104 Gryphon™ I GD4132/GM4102/GBT4102
Good Read LED Duration
This feature specifies the amount of time that the Good Read LED remains on
following a good read. The good read LED on time can be set within a range of
10 milliseconds to 2,550 milliseconds (0.001 to 2.55 seconds) in 100ms incre-
ments.
See page 305 in “References” for detailed instructions and examples for setting
this feature.
Select Good Read LED Duration Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
003 = Good Read LED stays on for 300 ms
Indicators are dimmed during sleep.
To Next Page
Loading...
