Datalogic Gryphon I GD4132 User Manual

ENTER/EXIT PROGRAMMING MODE
52 Gryphon™ I GD4132/GM4102/GBT 4102
ACK Character
This setting specifies an ASCII character or hex value to be used as the ACK
character. ASCII characters or any hex value from 0 to 0xFF can be selected. See
page 285 for more info
rmation.
Select ACK Character Setting
DEFAULT
0x06 ‘ACK’ Character
Setting to previously defined characters such as XON, XOFF, or host
commands conflicts with normal operation of these characters. 8-bit
data is not recognized when the option
Data Bits has been set as 7
Data Bits.
NAK Character
This setting specifies an ASCII character or hex value to be used as the NAK
character. ASCII characters or any hex value from 0 to 0xFF can be selected.
Setting to previously defined characters such as XON, XOFF, or host
commands conflicts with normal operation of these characters. 8-bit
data is not recognized when the option
Data Bits has been set as 7
Data Bits.
See
page 286 for more info
rmation.
Select NAK Character Setting
DEFAULT
0x15 ‘NAK’ Character

Datalogic Gryphon I GD4132 Specifications

General

Brand	Datalogic
Model	Gryphon I GD4132
Category	Barcode Reader
Language	English