Wireless Features ENTER/EXIT PROGRAMMING MODE
268 Gryphon™ I GD4132/GM4102/GBT4102
Request Flash Update
Scan this barcode to request a flash update from a Base Station
kl qb
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this barcode.
Powerdown Timeout
The Powerdown Timeout feature sets the time for automatically switching the
unit off when the imager has been idle.
Powerdown Timeout = Disable
Powerdown Timeout = 10 minutes
Powerdown Timeout = 20 minutes
Powerdown Timeout = 30 minutes
DEFAULT
To Next Page
Loading...
