ENTER/EXIT PROGRAMMING MODE
Product Reference Guide
217
Code 11 Set Length 1
This feature specifies one of the barcode lengths for Code 11 Length Control.
Length 1 is the minimum
label length if in Variable Length Mode, or the first
fixed length if in Fixed Length Mode. Length includes the barcode’s check and
data characters. The length can be set from 2 to 50 characters.
Table 18 provides some examples for setting Length 1. See page 294 for
detailed instructions on setting this feature.
Table 18. Code 11 Length 1 Setting Examples
STEP ACTION EXAMPLES
1
Desired Setting (pad with
leading zeroes)
02 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 11 LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘2’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 11 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
DEFAULT
04 = Length 1 is 4 Characters
To Next Page
Loading...
Need help?
General
