ENTER/EXIT PROGRAMMING MODE
84 Gryphon™ I GD4132/GM4102/GBT4102
Label ID: Set Individually Per Symbology
This feature configures a Label ID individually for a single symbology. See Label
ID: Set Individually Per Symbology, starting on page 301 for detailed instruc-
tions on setting this feature.
Label ID Control
This option controls whether a Label ID is disabled, or sent as a prefix or suffix
for a given symbology type.
DEFAULT
Label ID Transmission = Disable
Label ID Transmission = Enable as Prefix
Label ID Transmission = Enable as Suffix
CANCEL
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
To Next Page
Loading...
