Product Reference Guide
323
Appendix B
Technical Specifications
The most common configuration settings are listed in the “Default” column of
the table below. Page references are also provided for feature descriptions and
programming barcodes for each parameter. A column has also been provided
for recording of your preferred default settings for these same configurable
features.
Table 52. Standard Defaults
Parameter Default Your Setting
Page
Number
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore
Obey 41
USB Suspend Mode
Disable 41
RS-232 ONLY
Baud Rate
9600 44
Data Bits
8 Data Bits 45
Stop Bits
1 Stop Bit 45
Parity
None 46
Handshaking Control
RTS 47
RS-232/USB-Com
Intercharacter Delay
No Delay 49
Beep On ASCII BEL
Disable 50
Beep On Not on File
Enable 50
ACK Character
‘ACK’ 52
NAK Character
‘NAK’ 52
ACK NAK Timeout Value
200 ms 53
To Next Page
Loading...
Need help?
General
