ENTER/EXIT PROGRAMMING MODE
130 Gryphon™ I GD4132/GM4102/GBT4102
ADD-ONS
Contact Customer Support for advanced programming of optional and condi-
tional add-ons.
Optional Add-ons
The reader can be enabled to optionally read the following add-ons (supple-
mentals):
DEFAULT
Optional Add-Ons = Disable P2
Optional Add-Ons = Enable P2
DEFAULT
Optional Add-Ons = Disable P5
Optional Add-Ons = Enable P5
DEFAULT
Optional Add-Ons = Disable GS1-128
Optional Add-Ons = Enable GS1-128
If a UPC/EAN base label and an add-on are both decoded, the reader
will transmit the base label and add-on. If a UPC/EAN base label is
decoded without an add-on, the base label will be transmitted without
an add-on.
Conditional add-on settings (if enabled) are considered by the reader
before optional add-on settings.
To Next Page
Loading...
