ENTER/EXIT PROGRAMMING MODE
Product Reference Guide
161
Code 128 Set Length 2
This feature specifies one of the barcode lengths for Code 128 Length Control.
Length 2 is the maximum label length if in Variable Length Mode, or the second
fixed length if in Fixed Length Mode. Length includes the barcode’s data char-
acters only.
The length can be set from 1 to 80 characte
rs. A setting of 0 specifies to ignore
this length (only one fixed length).
Table 5 provides examples for setting Length 2. See page 295 for detailed
instructions on setting this feature.
Table 5. Code 128 Length 2 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 (Ignore This
Length)
07 Characters 15 Characters 80 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 128 LENGTH 2 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘0’ and ‘F’ ‘5’ AND 0’
5 Scan ENTER/EXIT PROGRAMMING MODE
.
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
DEFAULT
80 = Length 2 is 80 Characters
To Next Page
Loading...
Need help?
General
