Wireless Features ENTER/EXIT PROGRAMMING MODE
264 Gryphon™ I GD4132/GM4102/GBT4102
Base Station Beep
Enables/disables a beep indication when the handheld is placed in the Base
Station.
BT Base Station Beep = Disable
BT Base Station Beep = Enable
DEFAULT
Leash Alarm
This setting specifies the number of seconds to sound the Leash Mode beeps
(three per second) when the handheld goes out of range. This is especially use-
ful in instances where the reader might inadvertently have been placed in a bag
or cart.
For this mode to be effective, reader must be li
nked to the Base Station and
"S
leep Mode Timeout" on page 98 must be disabled. If the reader is asleep or
disconnected from the Base Station, there is no way for it to know where it is
r
elative to the Base Station because communication is not active between the
devices.
Leash Alarm = Disabled
Leash Alarm = 1 Second
Leash Alarm = 2 Seconds
To Next Page
Loading...
Need help?
General
