Datalogic Gryphon I GD4132

ENTER/EXIT PROGRAMMING MODE
160 Gryphon™ I GD4132/GM4102/GBT4102
Code 128 Set Length 1
Specifies one of the barcode lengths for Code 128 Length Control. Length 1 is
the minimum label length if in Variable Length Mode, or the first fixed length if
in Fixed Length Mode. Length includes the barcode
’s data characters only. The
length can be set from 1 to 80 characters.
Table 4 provides some examples for setting Length 1. See page 294 for
detailed instructions on setting this feature.
Table 4. Code 128 Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
01 Character 07 Characters 15 Characters 80 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 128 LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘8’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 128 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
DEFAULT
01 = Length 1 is 1 Character