Wireless Features ENTER/EXIT PROGRAMMING MODE
274 Gryphon™ I GD4132/GM4102/GBT4102
Source Radio Address Delimiter Character
This option specifies the delimiter character to be placed between the label
data and radio address when address stamping is enabled.
Set Source Radio Address Delimiter Character
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
00 = No Delimiter Character
This feature only applies if
"Source Radio Address Transmis-
sion"
on page 273 is enabled.
To Next Page
Loading...
