ENTER/EXIT PROGRAMMING MODE
Product Reference Guide
233
Code 93 Set Length 1
Specifies one of the barcode lengths for Code 93 Length Control. Length 1 is
the minimum label length if in Variable Length Mode, or the first fixed length if
in Fixed Length Mode. Length includes the barcode’s data characters only. The
length can be set from 01 to 50 characters.
Table 22 provides some examples for setting Length 1. See page 294 for
detailed instructions on setting this feature.
Table 22. Code 93 Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
01 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 93 LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 93 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
DEFAULT
01 = Length 1 is 1 Character
To Next Page
Loading...
