ENTER/EXIT PROGRAMMING MODE
Product Reference Guide
83
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be
one of hex 0x01-0xFF), used to identify a barcode (symbology) type. It can be
appended previous to or following the transmitted barcode data depending
upon how this option is enabled. This feature provides options for configuring
custom Label IDs as a pre-loaded set (see "Label ID: Pre-loaded Sets" below) or
individually per symbology (see "Label ID: Set Individually Per Symbology" on
page 84). If you wish to program the reader to alway
s include an industry stan-
dard label identifier for ALL symbology types, see the previous feature "Global
AIM ID" on
page 81.
See Label ID, starting on page 299 of “References” for more information on set-
ting this feature.
Label ID: Pre-loaded Sets
The reader supports two pre-loaded sets of Label IDs. See Label ID: Pre-loaded
Sets, starting on page 299 for details on the USA set and the EU set.
CAUTION
DEFAULT
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
When changing from one Label ID set to another, all other reader con-
figuration settings, including the host interface type, will be erased
and s
et to the standard factory defaults. Any custom configuration or
custom defaults will be lost.
To Next Page
Loading...
Need help?
General
