ENTER/EXIT PROGRAMMING MODE
116 Gryphon™ I GD4132/GM4102/GBT4102
UPC-A Number System Character Transmission
This feature enables/disables transmission of the UPC-A number system char-
acter.
UPC-A Number System Character = Do not transmit
UPC-A Number System Character = Transmit
UPC-A Minimum Reads
This feature specifies the minimum number of consecutive times a UPC-A label
must be decoded before it is accepted as a good read.
DEFAULT
UPC-A Minimum Reads = 1
UPC-A Minimum Reads = 2
UPC-A Minimum Reads = 3
UPC-A Minimum Reads = 4
To Next Page
Loading...
