Datalogic Gryphon I GD4132 - UPC-E Minimum Reads; UPC-E Number System Character Transmission

ENTER/EXIT PROGRAMMING MODE
Product Reference Guide 119
UPC-E Number System Character Transmission
This feature enables/disables transmission of the UPC-E system number char-
acter.
UPC-E Number System Character = Do not transmit
UPC-E Number System Character = Transmit
DEFAULT
UPC-E Minimum Reads
Specifies the minimum number of consecutive times a UPC-E label must be
decoded before it is accepted as a good read.
UPC-E Minimum Reads = 1
UPC-E Minimum Reads = 2
DEFAULT
UPC-E Minimum Reads = 3
UPC-E Minimum Reads = 4