ENTER/EXIT PROGRAMMING MODE
Product Reference Guide
41
GLOBAL INTERFACE FEATURES
The following interface features are configurable by all interface types.
Host Commands — Obey/Ignore
This option specifies whether the reader will obey or ignore host commands.
When set to ignore, the reader will ignore all host commands except for those
necessary for:
•service mode
• flash programming mode
•keeping the inte
rface active
• transmission of labels.
Host Commands = Obey
Host Commands = Ignore
USB Suspend Mode
This setting enables/disables the ability of USB interfaces to enter suspend
mode.
USB Suspend Mode = Disable
USB Suspend Mode = Enable
To Next Page
Loading...
Need help?
General
