ENTER/EXIT PROGRAMMING MODE
Product Reference Guide
77
Wand Idle State
This feature specifies the level of the Wand output signal when the reader is
idle.
Wand Idle State = Low
Wand Idle State = High
DEFAULT
TTL logic levels:
0V <= Low <= 0.7V
2.4V <= High <= 5.25V
Transmit Noise
This option specifies the leading/trailing noise for the Wand interface.
Transmit Noise = Disable
Transmit Noise = Transmit leading noise
Transmit Noise = Transmit trailing noise
Transmit Noise = Transmit leading and trailing noise
To Next Page
Loading...
