Setup
28 Gryphon™ I GD4132/GM4102/GBT 4102
Linking to a PC in HID
1. Install any drivers provided with the Bluetooth adapter.
2. Scan the Link to a PC in HID barcode below to make the scanner visible to
the ho
st computer.
Link to a PC in HID
3. Use the host computer's Bluetooth manager to "Discover new devices" and
select "Datalogic Scanner." If you receive an error message, it may be nec-
essary to disable security on the device.
4. Select "connect" on the PC to link the reader to the PC. Use a text editing
program to see
incoming data from the reader.
Gryphon™ I System and Network Layouts
Stand Alone Layouts
Figure 12 - Single Reader Layout
To Next Page
Loading...
