Datalogic Gryphon Series User Manual

Enter/Exit Programming Mode Reading Parameters
98 Gryphon™ I GD44XX / GBT4400/GM440X
Stand Mode Indication
This operation is useful for indicating when the reader is in Stand Mode. If enabled, the blue
indicator will blink when Stand Mode scanning is active. If reader detects motion (or removed
from base station for cordless models) and switches out of Stand Mode into Triggered Mode,
blinking will stop until Stand Mode is active again.
Stand Mode Indication = Disable
Stand Mode Indication = Enable
DEFAULT
$CSMFL00(CR)
$CSMFL01(CR)

Datalogic Gryphon Series Specifications

General

Connectivity	USB, RS-232, Keyboard Wedge, Bluetooth
Scan Pattern	Single-line or omnidirectional
Humidity	5% to 95% non-condensing
Decode Capability	1D and 2D barcodes
Ambient Light	Up to 100, 000 lux