Datalogic Gryphon Series User Manual

Product Reference Guide 301
Appendix B
Standard Defaults
The most common configuration settings are listed in the “Default” column of the table below.
Page references are also provided for featu
re descriptions and programming bar codes for each
parameter. A column has also been provided for recording of
your preferred default settings for
these same configurable features.
Table 54. Standard Defaults
Parameter Default Your Setting
Page
Nu
mber
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore
Obey 39
USB Suspend Mode
Disable 39
RS-232 ONLY
Baud Rate
9600 42
Data Bits
8 Data Bits 43
Stop Bits
1 Stop Bit 43
Parity
None 44
Handshaking Control
RTS 45
RS-232/USB-Com
Intercharacter Delay
No Delay 47
Beep On ASCII BEL
Disable 47
Beep On Not on File
Enable 48
ACK NAK Options
Disable 49
ACK Character
‘ACK’ 50
NAK Character
‘NAK’ 50
ACK NAK Timeout Value
200 ms 51
ACK NAK Retry Count
3 Retries 51
ACK NAK Error Handling
Ignore Errors Detected 52
Indicate Transmission Failure
Enable 52

Datalogic Gryphon Series Specifications

General

Connectivity	USB, RS-232, Keyboard Wedge, Bluetooth
Scan Pattern	Single-line or omnidirectional
Humidity	5% to 95% non-condensing
Decode Capability	1D and 2D barcodes
Ambient Light	Up to 100, 000 lux