Datalogic Gryphon Series User Manual

Product Reference Guide 251
MOTION FEATURES
Use this chapter to configure motion settings for the handheld.
Reference Appendix B for a listing of standard factory settings.
Motion Aiming Control
Configures the ability of the scanner to Enable/Disable the Aiming system when motion is
detected.
MOTION AIMING CONTROL on page 251
MOTION SENSITIVITY on page 252
MOTIONLESS TIMEOUT on page 252
Motion Aiming Control = Disable
Motion Aiming Control = Enable
$CMOMD00(CR)
$CMOMD01(CR)
DEFAULT

Datalogic Gryphon Series Specifications

General

Connectivity	USB, RS-232, Keyboard Wedge, Bluetooth
Scan Pattern	Single-line or omnidirectional
Humidity	5% to 95% non-condensing
Decode Capability	1D and 2D barcodes
Ambient Light	Up to 100, 000 lux