Datalogic Gryphon Series

UPC-E Enter/Exit Programming Mode
Product Reference Guide 115
UPC-E Check Character Transmission
Enable this option to transmit the check character along with UPC-E bar code data.
UPC-E 2D Component
This feature enables/disables a requirement that a 2D label component be decoded when a base
label for this symbology is decoded.
UPC-E Check Character Transmission = Don’t Send
UPC-E Check Character Transmission = Send
$CEBCT00(CR)
$CEBCT01(CR)
DEFAULT
UPC-E 2D Component =
Disable (2D component not required)
UPC-E 2D Component =
2D component must be decoded
DEFAULT
$CEB2D00(CR)
$CEB2D01(CR)