Datalogic Gryphon Series User Manual

Add-Ons Enter/Exit Programming Mode
Product Reference Guide 125
ADD-ONS
Contact Customer Support for advanced programming of optional and conditional add-ons.
Optional Add-ons
The reader can be enabled to optionally read the following add-ons (supplementals):
If a UPC/EAN base label and an add-on are both decoded, the reader will
transmit the base label and add-on. If a UPC/EAN base label is decoded
without an add-on, the base label will be transmitted without an add-on.

Conditional add-on settings (if enabled) are considered by the reader
before optional add-on settings.
Optional Add-Ons = Disable P2
Optional Add-Ons = Enable P2
Optional Add-Ons = Disable P5
Optional Add-Ons = Enable P5
Optional Add-Ons = Disable GS1-128
Optional Add-Ons = Enable GS1-128
DEFAULT
$CADO200(CR)
$CADO201(CR)
DEFAULT
$CADO500(CR)
$CADO501(CR)
DEFAULT
$CADO800(CR)
$CADO801(CR)

Datalogic Gryphon Series Specifications

General

Connectivity	USB, RS-232, Keyboard Wedge, Bluetooth
Scan Pattern	Single-line or omnidirectional
Humidity	5% to 95% non-condensing
Decode Capability	1D and 2D barcodes
Ambient Light	Up to 100, 000 lux