Datalogic Gryphon Series

Batch Features Enter/Exit Programming Mode
Product Reference Guide 241
Erase Batch Memory
Use this bar code to erase any labels stored in batch memory.
RF Batch Mode Transmit Delay
Specifies the delay in 10 msec increments between transmitting labels stored in batch memory.
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction
with this bar code.
Erase Batch Memory
RF Batch Mode Transmit Delay = No Delay
RF Batch Mode Transmit Delay = 50 mS
RF Batch Mode Transmit Delay = 100 mS
RF Batch Mode Transmit Delay = 0.5 seconds
RF Batch Mode Transmit Delay = 1 second
RF Batch Mode Transmit Delay = 2.5 seconds
DEFAULT
$CBTTD00(CR)
$CBTTD05(CR)
$CBTTD0A(CR)
$CBTTD32(CR)
$CBTTD64(CR)
$CBTTDFA(CR)