Datalogic Gryphon Series

Enter/Exit Programming Mode Wireless Beeper Features
236 Gryphon™ I GD44XX / GBT4400/GM440X
Beep Volume
Selects the beeper volume (loudness) of radio-specific beep indications. There are three
selectable volume levels.
Disconnect Beep
Enables/disables the beep indication that a handheld has become connected or disconnected
from a Base Station.
Beep Volume = Low
Beep Volume = Medium
Beep Volume = High
$CBTBV00(CR)
$CBTBV01(CR)
$CBTBV02(CR)
DEFAULT
The defaults are different for the STAR and BT models.
Disconnect Beep = Disable
Disconnect Beep = Enable
$CBTDB00(CR)
$CBTDB01(CR)
DEFAULT