Datalogic Gryphon Series User Manual

Product Reference Guide 89
READING PARAMETERS
DOUBLE READ TIMEOUT on page 90 SCANNING ACTIVE TIME on page 101
LED AND BEEPER INDICATORS on page 92 STAND ILLUMINATION CONTROL on page 102
POWER ON ALERT on page 92 FLASH ON TIME on page 103
GOOD READ: WHEN TO INDICATE on page 92 FLASH OFF TIME on page 103
GOOD READ BEEP TYPE on page 93 AIMING POINTER on page 104
GOOD READ BEEP FREQUENCY on page 93 AIMING DURATION TIMER on page 104
GOOD READ BEEP LENGTH on page 94 GREEN SPOT DURATION on page 105
GOOD READ BEEP VOLUME on page 95 MOBILE PHONE MODE on page 105
GOOD READ LED DURATION on page 96 PARTIAL LABEL READING CONTROL on page 106
SCAN MODE on page 97 DECODE NEGATIVE IMAGE on page 106
STAND MODE INDICATION on page 98 IMAGE CAPTURE on page 107
STAND OPERATION on page 99 MULTIPLE LABELS PER FRAME on page 107
PICK MODE on page 100
MULTIPLE LABELS ORDERING BY CODE SYM-
BOLOGY on page 108
STAND MODE SENSITIVITY on page 100
MULTIPLE LABELS ORDERING BY CODE LENGTH
on page 108
STAND MODE ILLUMINATION OFF TIME on
page 101

Datalogic Gryphon Series Specifications

General

Connectivity	USB, RS-232, Keyboard Wedge, Bluetooth
Scan Pattern	Single-line or omnidirectional
Humidity	5% to 95% non-condensing
Decode Capability	1D and 2D barcodes
Ambient Light	Up to 100, 000 lux