Datalogic Gryphon Series User Manual

Product Reference Guide 109
1D SYMBOLOGIES
1D Code Selection
The reader supports the following 1D symbologies (bar code types). See "2D Symbologies"
starting on page 201
for 2D bar codes. Symbology-dependent options are included in each
chapter.
Default settings are indicated at each feature/op
tion with a green arrow. Also reference
Appendix B, Standard Defaults for a listing of the most widely used set of standard factory
settings. That section also provides s
pace to record any custom settings needed or implemented
for your system.
To set most features:
1. Scan the ENTER/EXIT PROGRAMMING bar code at the top of
applicable program-
ming pages.
2. Scan the correct bar code to set the desired programming feature or parameter. You may
need to co
ver unused bar codes on the page, and possibly the facing page, to ensure that
the reader reads only the bar code you intend to scan.
3. If additional input parameters are needed, go to Appendix D, Keypad, and scan the
appropriate characters from the keypad.
4. Complete the programming sequence b
y scanning the ENTER/EXIT PROGRAM-
MING bar code to exit Programming Mode.
• Disable All Symbologies, page 110 • GS1-128, page 148
• Code EAN/UPC, page 111 • Code ISBT 128, page 149
• UPC-E, page 114 • Interleaved 2 of 5 (I 2 of 5), page 152
• GTIN Formatting, page 117 • Interleaved 2 of 5 CIP HR, page 157
• EAN 13 (Jan 13), page 118 • Follett 2 of 5, page 157
• ISSN, page 120 • Standard 2 of 5, page 158
• EAN 8 (Jan 8), page 121 • Industrial 2 of 5, page 162
• UPC/EAN Global Settings, page 123 • Code IATA, page 166
• Add-Ons, page 125 • Codabar, page 167
• Code 39, page 132 • ABC Codabar, page 173
• Trioptic Code, page 138 • Code 11, page 176
• Code 32 (Ital Pharmaceutical Code),
page 138 • GS1 DataBar™ Omnidirectional, page 180
• Code 39 CIP (French Pharmaceuti
cal), page 140 • GS1 DataBar™ Expanded, page 181
• Code 39 Danish PPT, page 140 • GS1 DataBar™ Limited, page 186
• Code 39 LaPoste, page 141 • Code 93, page 187
• Code 39 PZN, page 141 • MSI, page 192
• Code 128, page 142 • Plessey, page 197
Additional information about many features can be found in the “Refer-
ences” chapter.
If you make a mistake before the last character, scan the CANCEL bar code
to
abort and not save the entry string. You can then start again at the
beginning.

Datalogic Gryphon Series Specifications

General

Connectivity	USB, RS-232, Keyboard Wedge, Bluetooth
Scan Pattern	Single-line or omnidirectional
Humidity	5% to 95% non-condensing
Decode Capability	1D and 2D barcodes
Ambient Light	Up to 100, 000 lux