Datalogic Gryphon Series

Code 11 Enter/Exit Programming Mode
Product Reference Guide 177
Code 11 Check Character Transmission
This feature enables/disables transmission of an optional Code 11 check character.
Code 11 Length Control
This feature specifies either variable length decoding or fixed length decoding for the Code 11
symbology.
Variable Length: For variable length decoding, a minimum and maximum length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
Code 11 Check Character Transmission = Don’t Send
Code 11 Check Character Transmission = Send
$CC1CT00(CR)
$CC1CT01(CR)
DEFAULT
Code 11 Length Control = Variable Length
Code 11 Length Control = Fixed Length
DEFAULT
$CC1LC00(CR)
$CC1LC01(CR)