Datalogic Gryphon Series User Manual

Enter/Exit Programming Mode Reading Parameters
100 Gryphon™ I GD44XX / GBT4400/GM440X
Pick Mode
Specifies the ability of the reader to decode labels only when they are close to the center of the
aiming pattern. This allows the reader to accurately target labels when they are placed close
together, such as on a pick sheet.
Stand Mode Sensitivity
Sets the sensitivity level for stand mode wakeup. Choices are low, medium and high.
This feature is not compatible with Multiple Labels Reading in a Volume.
Pick Mode = Disable
Pick Mode = Enable
DEFAULT
$CSNPM00(CR)
$CSNPM01(CR)
Stand Mode Sensitivity = Low
Stand Mode Sensitivity = Medium
Stand Mode Sensitivity = High
$CSMSE00(CR)
$CSMSE01(CR)
DEFAULT
$CSMSE02(CR)

Datalogic Gryphon Series Specifications

General

Connectivity	USB, RS-232, Keyboard Wedge, Bluetooth
Scan Pattern	Single-line or omnidirectional
Humidity	5% to 95% non-condensing
Decode Capability	1D and 2D barcodes
Ambient Light	Up to 100, 000 lux