Datalogic Gryphon Series User Manual

Wireless Beeper Features Enter/Exit Programming Mode
Product Reference Guide 237
Docking Beep
Enables/disables a beep indication when the handheld is placed in the Base Station.
Leash Alarm
This setting specifies the number of seconds to sound the Leash Mode beeps (three per second)
when the handheld goes out of range. This is especially useful in instances where the reader
might inadvertently have been placed in a bag or cart.
For this mode to be effective, the reader must be linked to the Base Station. If the
reader is
asleep or disconnected from the Base Station, there is no way for it to know where it is relative
to the Base Station because communication is not active between the devices.
Docking Beep = Disable
Docking Beep = Enable
$CBTCB00(CR)
$CBTCB01(CR)
DEFAULT
Leash Alarm = Disabled
Leash Alarm = 1 Second
Leash Alarm = 2 Seconds
DEFAULT
$CBTLB00(CR)
$CBTLB01(CR)
$CBTLB02(CR)

Datalogic Gryphon Series Specifications

General

Connectivity	USB, RS-232, Keyboard Wedge, Bluetooth
Scan Pattern	Single-line or omnidirectional
Humidity	5% to 95% non-condensing
Decode Capability	1D and 2D barcodes
Ambient Light	Up to 100, 000 lux