Datalogic Gryphon Series User Manual

2D Global Features Enter/Exit Programming Mode
Product Reference Guide 203
2D Structured Append
Enables/disables ability of reader to append multiple 2D Codes labels in a structured format.
The structured append property is globally applied to the following symbologies, if these are
enabled:
2D Normal/Inverse Symbol Control
Specifies the options available for decoding normal/negative printed 2D symbols. This
configuration item applies globally to all the 2D symbologies that support that feature
according to Standard AIM Specification: Data Matrix, QR, MicroQR, Aztec and Chinese
Sensible Code.
To decode all symbologies, including linear sym
bologies, refer to "Decode Negative Image" on
page 106D Symbology Selection
• Data Matrix •Aztec
•QR Code • PDF 417
Structured Append = Disable
Structured Append = Enable
DEFAULT
$CDESA00(CR)
$CDESA01(CR)
Normal/Inverse Symbol Control = Normal
Normal/Inverse Symbol Control = Inverse
Normal/Inverse Symbol Control =
B
oth Normal and Inverse
DEFAULT
$CIPNR00(CR)
$CIPNR01(CR)
$CIPNR02(CR)

Datalogic Gryphon Series Specifications

General

Connectivity	USB, RS-232, Keyboard Wedge, Bluetooth
Scan Pattern	Single-line or omnidirectional
Humidity	5% to 95% non-condensing
Decode Capability	1D and 2D barcodes
Ambient Light	Up to 100, 000 lux