Datalogic Gryphon Series

Global AIM ID Enter/Exit Programming Mode
Product Reference Guide 79
Set AIM ID Individually for GS1-128
This feature configures a Label ID individually for the GS1-128 symbology and the
programming for this works the same way as Label ID. See Label ID: Set Individually Per
Symbology, starting on page 272 for detailed instructions on s
etting this feature.
Set AIM ID Individually for GS1-128 = Disable
Set AIM ID Individually for GS1-128 = Enable
$CU8AI00(CR)
$CU8AI01(CR)
DEFAULT