Datalogic Gryphon Series

EAN 8 (Jan 8) Enter/Exit Programming Mode
Product Reference Guide 121
EAN 8 (JAN 8)
The following options apply to the EAN 8 (Jan 8) symbology.
EAN 8 Enable/Disable
When disabled, the reader will not read EAN 8/JAN 8 bar codes.
EAN 8 Check Character Transmission
Enable this option to transmit the check character along with EAN 8 bar code data.
EAN 8 = Disable
EAN 8 = Enable
$C8BEN00(CR)
$C8BEN01(CR)
DEFAULT
EAN 8 Check Character Transmission = Don’t Send
EAN 8 Check Character Transmission = Send
$C8BCT00(CR)
$C8BCT01(CR)
DEFAULT