Datalogic Gryphon Series

Code 93 Enter/Exit Programming Mode
Product Reference Guide 187
GS1 DataBar™ Limited 2D Component
This feature enables/disables a requirement that a 2D label component be decoded when a base
label of this symbology is decoded.
CODE 93
The following options apply to the Code 93 symbology.
Code 93 Enable/Disable
Enables/Disables ability of reader to decode Code 93 labels.
GS1 DataBar™ Limited 2D Component =
Disable (2D component not required)
GS1 DataBar™ Limited 2D Component =
2D c
omponent must be decoded
DEFAULT
$CLB2D00(CR)
$CLB2D01(CR)
Code 93 = Disable
Code 93 = Enable
DEFAULT
$CC9EN00(CR)
$CC9EN01(CR)