Datalogic Gryphon Series

Enter/Exit Programming Mode USB-OEM Interface
66 Gryphon™ I GD44XX / GBT4400/GM440X
USB-OEM Device Usage
The USB-OEM protocol allows for the reader to be identified as one of two different types of bar code scanners.
Depending on what other scanners you may already have connected to a USB-OEM POS, you may need to change
this setting to enable all devices to communicate.
Options are:
• Table Top Scanner
• Handheld Scanner
Interface Options
This feature provides for an interface-specific control mechanism.
It may be necessary to switch device usage when connecting two readers/scanners of the same
type to a POS system.
USB-OEM Device Usage = Table Top Scanner
USB-OEM Device Usage = Handheld Scanner
Obey Scanner Configuration Host Commands
Ignore Scanner Configuration Host Commands
$CIBUT00(CR)
$CIBUT01(CR)
DEFAULT
$CIFO101(CR)
$CIFO102(CR)
DEFAULT