Datalogic Gryphon Series User Manual

Enter/Exit Programming Mode RS-232/USB-Com Interfaces
52 Gryphon™ I GD44XX / GBT4400/GM440X
ACK NAK Error Handling
This feature specifies the method the reader uses to handle receive errors detected while waiting for an ACK
character from the host.
Indicate Transmission Failure
This option enables/disables the reader’s ability to sound an error beep to indicate a transmission failure while in
ACK/NAK mode.
ACK NAK Error Handling = Ignore Errors Detected
ACK NAK Error Handling = Process Error as Valid ACK
Ch
aracter
ACK NAK Error Handling = Process Error as
V
alid NAK Character
Indicate Transmission Failure = Disable Indication
Indicate Transmission Failure = Enable Indication
DEFAULT
$CR2EH00(CR)
$CR2EH01(CR)
$CR2EH02(CR)
$CR2TF00(CR)
$CR2TF01(CR)
DEFAULT

Datalogic Gryphon Series Specifications

General

Connectivity	USB, RS-232, Keyboard Wedge, Bluetooth
Scan Pattern	Single-line or omnidirectional
Humidity	5% to 95% non-condensing
Decode Capability	1D and 2D barcodes
Ambient Light	Up to 100, 000 lux