Datalogic Gryphon Series User Manual

Product Reference Guide 71
WAND EMULATION INTERFACE
This chapter provides feature/settings configuration for the Wand Emulation interface.
Reference Appendix B for a listing of standard factory settings.
This feature is valid only for the GBT4400 model.
WAND SIGNAL SPEED on page 72
WAND POLARITY on page 72
WAND IDLE STATE on page 73
TRANSMIT NOISE on page 73
LABEL SYMBOLOGY CONVERSION on page 74

Datalogic Gryphon Series Specifications

General

Connectivity	USB, RS-232, Keyboard Wedge, Bluetooth
Scan Pattern	Single-line or omnidirectional
Humidity	5% to 95% non-condensing
Decode Capability	1D and 2D barcodes
Ambient Light	Up to 100, 000 lux