Datalogic Gryphon Series

Configuration Updates Enter/Exit Programming Mode
Product Reference Guide 239
Configuration Updates
See page 285 in “References” for detailed information and examples of these features.
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can automatically ensure they
stay in sync with regard to application hardware and/or configuration. See page 285 for more in-
formation on this feature.
Copy Configuration to Scanner
Scan the following label to copy the current Base Station configuration to the scanner. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time con-
figuration update to be performed on the scanner.
Copy Configuration to Base Station
Scan the following label to copy the current scanner configuration to the Base Station. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time
configuration update to be performed on the Base Station.
Automatic Configuration Update = Disable
Automatic Configuration Update = Enable
$CBTCU00(CR)
$CBTCU01(CR)
DEFAULT
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction
with this bar code.
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar code.
py g
Copy Configuration to Scanner
Copy Configuration to Base Station
Cpycfg2Ba