Datalogic Gryphon Series

Wand Emulation Interface Enter/Exit Programming Mode
Product Reference Guide 73
Wand Idle State
This feature specifies the level of the Wand output signal when the reader is idle.
Transmit Noise
This option specifies the leading/trailing noise for the Wand interface.
TTL logic levels: 
0V <= Low <= 0.7V 
2.4V <= High <= 5.25V
Wand Idle State = Low
Wand Idle State = High
$CWAID00(CR)
$CWAID01(CR)
DEFAULT
Transmit Noise = Disable
Transmit Noise = Transmit leading noise
Transmit Noise = Transmit trailing noise
Transmit Noise = Transmit leading and trailing noise
DEFAULT
$CWATN00(CR)
$CWATN01(CR)
$CWATN02(CR)
$CWATN03(CR)