Datalogic Gryphon Series

Reading Parameters Enter/Exit Programming Mode
Product Reference Guide 93
Good Read Beep Type
Specifies whether the good read beep has a mono or bitonal beep sound.
Good Read Beep Frequency
Adjusts the good read beep to sound at a selectable low, medium or high frequency, selectable
from the list below. (Controls the beeper’s pitch/tone.)
Good Read Beep Type = Mono
Good Read Beep Type = Bitonal
DEFAULT
$CBPTY00(CR)
$CBPTY01(CR)
Good Read Beep Frequency = Low
Good Read Beep Frequency = Medium
Good Read Beep Frequency = High
$CBPFR00(CR)
$CBPFR01(CR)
DEFAULT
$CBPFR02(CR)