Datalogic Gryphon Series User Manual

Product Reference Guide 303
Set AIM ID Individually for GS1-128
Enable 79
Label ID: Pre-Loaded Sets
EU Set 80
Individually Set Label ID
Disable 81
Case Conversion
Disable
87
Character Conversion
No Char Conversion 88
READING PARAMETERS
Double Read Timeout
0.6 Second 89
Power On Alert
Power-up Beep 92
Good Read: When to Indicate
After Decode 92
Good Read Beep Type
Mono 93
Good Read Beep Frequency
High 93
Good Read Beep Length
80 ms 94
Good Read Beep Volume
High 95
Good Read LED Duration
300 ms 96
Scanning Features
Scan Mode
Trigger Single 97
Stand Mode Indication
Disable 98
Stand Operation
Switch to Stand Mode 99
Pick Mode
Disable 100
Stand Mode Sensitivity
Medium 100
Stand Mode Illumination Off Time
2 Seconds 101
Scanning Active Time
5 Seconds 101
Stand Illumination Control
OFF 102
Flash On Time
10 = Flash is ON for 1
Second
103
Flash Off Time
06 = Flash is OFF for
600ms
103
Aiming Pointer
Enable 104
Aiming Duration Timer
Aiming Off
After Decoding
104
Green Spot Duration
300 ms 105
Mobile Phone Mode
Enable 105
Parameter Default Your Setting
Page
Number

Datalogic Gryphon Series Specifications

General

Connectivity	USB, RS-232, Keyboard Wedge, Bluetooth
Scan Pattern	Single-line or omnidirectional
Humidity	5% to 95% non-condensing
Decode Capability	1D and 2D barcodes
Ambient Light	Up to 100, 000 lux