Dell PowerConnect M8024 - 6 Configuring System Information

Configuring Dell PowerConnect 101
console(config)#aaa authentication login default line
console(config)#aaa authentication enable default line
console(config)#line console
console(config-line)#login authentication default
console(config-line)#enable authentication default
console(config-line)#password tommy123
console(config-line)#exit
console(config)#line telnet
console(config-line)#login authentication default
console(config-line)#enable authentication default
console(config-line)#password bobby123
console(config-line)#exit
console(config)#line ssh
console(config-line)#login authentication default
console(config-line)#enable authentication default
console(config-line)#password jones123
console(config-line)#exit
8.
Save the running-config file to the startup-config file.
This ensures that the configuration just completed is the same if the switch is rebooted.
console(config)#exit
console#copy running-config startup-config
The switch is now configured and can be managed through the different options such as Telnet, Web
browser interface, and others.